Civic EK Water Vapor Jet

       
  Part Number Description R.R.P

INVO-WVP

WATER VAPOR JET

Universal fitment for any vehicle with Electronic fuel injection system with fuel regulator and controlled by ECU engine Management. Can be reused on other cars.

280+vat

 
Honda Integra Honda Prelude Porsche BMW
Honda Civic EG Jordan Civic Fiat Jaguar
Honda CRX 88-91 Toyota Yaris Saab Vauxhall
Honda CRX 92-96 Nissan Skyline Mercedes Rover
Honda Accord Audi VW Corrado New Mini
Honda Civic EK9      
       

 

Fitted on honda Civic EK4-VTI and This Water Vapour Jet has been fitted by Invo with RK Tuning discovering that we can use a two way system with the Water Vapour Jet. Using a Y-Junction you can split the vacuum pipe. The first split goes into the Fuel regulator and the second vacuum pipe goes on to the middle of the intake manifold where the grey pipe is. Similar to the size of your little finger. This gives the car double the response and torque of the Water Vapour Jet. Open picture 2 and 4 for clearer idea. Contact Invo auto ltd on 0207 607 1677 or Tommy on 07831-579043. This applies to Honda only. Please enquire for other cars.

" Hi Tommy! It's Phi ere. Just emailing you to comment on the Gen3 Titanium back box, I have to say that this is the best looking back box I've ever seen. Top quality Titanium blue with a really nice deep sound. A real head turner! Vapor jet system. A definite noticeable improvement in performance at lower RPMs. I find it very useful for V-Tec engines, cause there's more power there now to push the revs up quicker towards the V-Tec point, much more fun and exciting to drive now. " You could always email our customer to ask him personally at cyborg_r@msn.com (Phi Cun).

     

This green civic EK4-VTI  belongs to STEFF, we have supply a lot of our products to this car, this car is turbo charge by PRISM Motorsport 0207 607 1677, it's also used our water vapor kit, our limited edition GEN 3 TITANIUM EXHAUST for the maximum flow, and our new carbon air filter, it fits directly onto the turbo.It's 270 bhp NOW!  If you want to speak to STEFF, his number is 07831 579043

     

This red car is Invo Auto demo's civic, fitted with water vapor kit and air induction system, you can ring to 07831 579043 ask for Tommy about the products.0207 607 1677

This Honda Civic EK4 3-Door Hatchback VTi has been fitted with the Invo Water Vapor Jet, Stainless Filter and Turbo Jet. The fifth picture shows clearly where the connection is made via a T-Piece.

This was supplied and fitted by R K Tuning of North London. Their details can be found on our agents page. 0270 607 1677

     

Honda Civic EK Coupe 1.6 LSi 96-ON. Supplied and fitted by Jenks Autos in East London. Their details can be found on our agents page.
0207 607 1677

     

This Honda Civic EK 3 Door Hatchback VTi has also been fitted with the Invo Water Vapor Jet and Stainless Filter . The Water Vapor Jet stands out a little in this cars chrome dressing, but hey, nothing is perfect.

You can call Invo auto ltd on 0207 607 1677. Ask for tommy regarding our Water Vapor Jet.

     

This Honda Civic EK 2 Door Coupe VTi has been fitted with the Invo Water Vapor Jet, Titanium Exhaust, Stainless Filter and Turbo Jet.

RRR Motor Sport are responsible for fitting our Water Vapor on this car and Supplied by Invo auto ltd 
0207 607 1677

     

The pictures above are from our trip to Lisbon, Portugal. This Honda Civic EK LS 1.5 16V 3 Door 96-ON belongs to a client who purchased the Water Vapour Jet system on a track day. Our agents, Nipo Tuning supplied and fitted the system. Their details can be found on our agents page. Supplied by Invo auto ltd  0207 607 1677

     

This is a Honda Civic 4 Door Saloon EK 1.6 VTi fitter with our Water Vapor Jet. Fitted and supplied by Storm Motor Sports. See our agents page. Or call the owner ( Michael ) and ask about its performance on his civic 07831579043 and Supplied by Invo auto ltd  0207 607 1677

 
 

Fitted on honda Civic EK9 TYPE-R and This Water Vapour Jet has been fitted by Invo with RK Tuning discovering that we can use a two way system with the Water Vapour Jet. Using a Y-Junction you can split the vacuum pipe. The first split goes into the Fuel regulator and the second vacuum pipe goes on to the middle of the intake manifold where the grey pipe is. Similar to the size of your little finger. This gives the car double the response and torque of the Water Vapour Jet. Open picture 2, 3 and 5. for clearer idea. Contact Invo auto ltd on 0207 607 1677 or Tommy on 07831-579043. This applies to Honda only. Please enquire for other cars.

" Hi Tommy! It's Phi ere. Just emailing you to comment on the Titanium Generation 3 exhaust , I have to say that this is the best looking back box I've ever seen. Top quality Titanium blue with a really nice deep sound. A real head turner! Vapor jet system. A definite noticeable improvement in performance at lower RPMs. I find it very useful for V-Tec engines, cause there's more power there now to push the revs up quicker towards the V-Tec point, much more fun and exciting to drive now. " You could always email our customer to ask him personally at tommy@invoauto.co .uk

 

This Honda Jordan Civic has been fitted with our Water Vapor Jet and Carbon Induction Kit. click for bigger picture of pic2. It was fitted by Mike Spence of MGS Performance in Scotland. 11 Prestonhall Cresent, Rosewell, Midlothian, EH24 9BG. TEL: 0131 4400001. MOBILE: 07831 63000.The owner, Stuart Anderson ( The Royal Bank of Scotland, Retail Relationship Manager ) was so amazed, he had this to say about our Water Vapor Jet...

"Thanks for your time spent in Scotland. It was good to meet you guys. I have to say the water Vapor Jet is working a treat on the Jordan. It gives a good bit more power mid-range as you suggested and I am in fact saving on fuel. I got around 30+ miles extra on a full tank. That was including me putting the foot down a good bit as well. I also felt the car pickup off the mark a bit quicker. I showed my friend who owns the Accord the Water Vapor Jet and he has confirmed to Mike that he wants to purchase one. Have to say your Induction Kit sounds superb. Keep in touch and let us know of any news or events. Thanks... Stuart"

If you want to speak to Stuart about our products, you can contact Stuart on the following: MOBILE: 07748 761437, WORK: 0131 6699189, EMAIL: stuart.b.anderson@rbs.co.uk or jordvti@aol.com

Supplied and fitted by Mike Spence of MGS Performance. TEL: 0131 4400001 and Supplied by Invo auto ltd  0207 607 1677

 
Accessories | Air Induction | Body kits | Brakes | Clock dash | Clutch | Coilovers | Exhausts | Filters | Manifolds
Mirrors | Crank Pullies | Short Shift | Spark Plugs | Strut Brace | Turbo Jet | Water Vapour Jet
 

Copyright Invoauto 2002